China best Factory Supply RW826 Fw107 311309 191498625 6n0498625 407260016 Fwb17 513021 311309 Wheel Beaeing for Audi VW with High Quality near me shop

Product Description

 

Name: Factory supply RW826 FW107 311309 191498625 6N0498625 40726 311309 wheel beaeing for AUDI VW with high quality
  wheel bearing
Position: Front/rear axle
Weight: 1KG
Specifications: 45*84*40/42mm
Material: Chrome steel/GCR-15
Technology: Hot forging
CAGE: TN Nylon
SEAL: ZZ, 2RS
Rolling body: Steel ball
ABS: Without
Quality: Top grade
Brands: DHXB, OEM
Origin: China
 


Introduction to WHEEL BEARINGS
Double row roller or ball wheel bearings, composed of 2 interior sets housed in 1 outer ring, can withstand large radial and axial loads in both directions.
They allow for rigid bearing arrangements and are suitable for bearing arrangements where rigid axial guidance is required.
The double row roller/ball wheel bearing allow for space saving applications and in many cases the bearing require no maintenance since it’s lubricated for life.

Related Catalogues You May Concern

DAC25520037 DAC35680040 DAC40700043 DAC42800342 DAC47880055 DAC43800040ABS DU30620048
DAC25520042 DAC35680042 DAC40720036 DAC42800045 DAC47880571 DAC43820047ABS DU30620051
DAC25520043 DAC35720033 DAC40720037 DAC42800046 DAC48890044/42 DAC44825037ABS DU35680042
DAC25550045 DAC35770042 DAC4571055 DAC42820036 DAC49840042/40 DAC45820042ABS DU35680048
DAC25550048 DAC35800047 DAC40740036/34 DAC42820037 DAC49840048 DAC45830039ABS DU38650052/48
DAC25620048 DAC36640042 DAC40740036 DAC42820040 DAC49840043 DAC45830044ABS DU38760043/40
DAC27520045/43 DAC36680033 DAC40740040 DAC42840036 DAC49840050 DAC45840039ABS DU39680037
DAC27520043 DAC37680034 DAC40740042 DAC42840039 DAC49880046 DAC45840042/40ABS DU39720037
DAC27600050 DAC37720033 DAC4571037 DAC43760043/40 DAC49900045 DAC45840045ABS DU40680042
DAC28580042 DAC37720037 DAC4571039 DAC43760043 DAC50920050 DAC45850041ABS DU4571040
DAC28580044 DAC37740045 DAC4571033 DAC43770042/38 DAC51890044/42 DAC45850047ABS DU4571055
DAC29530037 DAC38640036/33 DAC4571041/38 DAC43770046/42 DAC51910044 DAC45880039ABS DU4571050
DAC30600337 DAC38650052/48 DAC40800036/34 DAC43780044 DAC35680037ABS DAC47850052ABS DU4080045/44
DAC30620038 DAC38680037 DAC40800038 DAC43790041/38 DAC35720033ABS DAC48860042/40ABS DU416800040/35
DAC30630042 DAC38690039/34 DAC40800040 DAC43790045 DAC37720033ABS DAC49880048ABS DU42760039
DAC30640042 DAC38715713/30 DAC40800045/44 DAC43800038 DAC37720037ABS DAC49900045ABS DU42800038
DAC30680045 DAC381700037 DAC40820036 DAC43800050/45 DAC37740037ABS DAC50920050ABS DU43730045/41
DAC32720571/19 DAC38700038 DAC408457138 DAC43820045 DAC38690039/34ABS DAC51890044ABS DU45820045
DAC32720045 DAC38710039 DAC40940031/26 DAC43/45820037 DAC38730040ABS DAC51910044/42ABS DU45850051
DAC32730054 DAC38720037 DAC457180032/17 DAC43/45850037 DAC38740040ABS DAC51910044ABS DU45900054/51
DAC34620037 DAC38720040 DAC41680040/35 DAC45800045 DAC39720037ABS DAC51960050ABS DU47820571
DAC34640037 DAC38725716/33 DAC42720038 DAC45805710 DAC39740039ABS DAC52910040ABS DU47850045
DAC34660037 DAC38730040 DAC42720038/35 DAC45830045 DAC40740040ABS DAC52960050ABS DU47880055
DAC34670037 DAC38740040 DAC42720052/48 DAC45840039 DAC4571037ABS DAC54900050ABS DU49840048
DAC35618040 DAC38745716/33 DAC42750037 DAC45840040 DAC4571039ABS DAC54920050ABS DU5571051
DAC35620040 DAC38740036 DAC42760033 DAC45840045 DAC40780040ABS DAC54950048ABS DU54960051
DAC35640037 DAC38740050 DAC42760038/35 DAC45840041/39 DAC408457197ABS DAC54980050ABS DU55900054ABS
DAC35650035 DAC38760043 DAC42760039 DAC45840041 DAC40840640/39ABS DAC54960051 DU55900055
DAC35650037 DAC38790045 DAC42760040/37 DAC45840042/40 DAC42770039ABS DU25520037 DU55900060
DAC35660032 DAC38800036/33 DAC42780040 DAC45840048 DAC42800039ABS DU25550043 U399-U360L
DAC35660033 DAC39680037 DAC42780045 DAC45850041 DAC42800045ABS DU25550045 U298-U261L
DAC35660037 DAC3968571 DAC42770039 DAC45860045 DAC42820036ABS DU25550048 U497/U460L
DAC35670042 DAC39720037 DAC42800036/34 DAC45880039 DAC42820042ABS DU25600045  
DAC35685713/30 DAC39740036/34 DAC42800036 DAC45880045 DAC42825037ABS DU25620048  
DAC35680039/36 DAC39740039 DAC42800037 DAC45870041/39 DAC43780044ABS DU26520037  
DAC35680037 DAC39/41750037 DAC42800038 DAC47810053 DAC43790041/38ABS DU26520041  

ZheJiang Huaxu Bearing Co.,Ltd 
Our factory specialize wheel hub bearing, wheel bearing kit, clutch bearing, taper roller bearing, truck bearing, wheel hub bearing in high quality.
Our bearings have large loading capacity and long lifetime, and widely fit in different vehicles.
wheel bearings and kits to vehicles like LADA, TOYOTA, HONDA, RENAULT, AUDI,Chevrolet, HYUNDAI,FIAT, FORD and so on.
Truck bearings applied to VOLVO, SCANIA, MAN, BENZ, DAF, SAF and so on.
And we can produce bearings which can meet your multifarious demands.
For example, wheel bearing, taper roller bearing, clutch release bearing, ball bearing, truck bearing ect. 
We can provide brands likeSKF, TIMKEN, NSK, KOYO, NTN,, NACHI, GMB, BW, GM, HYUNDAI ect.

Q:What’s your after-sales service and warranty?
A: We promise to bear the following responsibilities when defective products were found:
1.12 months warranty from the first day of receiving goods;
2. Replacements would be sent with goods of your next order;
3. Refund for defective products if customers require.

Q:Do you accept ODM&OEM orders?
A: Yes, we provide ODM&OEM services to worldwide customers, we also customize OEM box and packing as your requirements.

Q:What’s the MOQ?
A: MOQ is 10pcs for standardized products; for customized products, MOQ should be negotiated in advance. There is no MOQ for sample orders.

Q:How long is the lead time?
A: The lead time for sample orders is 3-5 days, for bulk orders is 5-15 days.

Q:Do you offer free samples? 
A: Yes we offer free samples to distributors and wholesalers, however customers should bear freight. We DO NOT offer free samples to end users. 

Q:How to place order?
A: 1. Email us the model, brand and quantity,shipping way of bearings and we will quote our best price for you; 
2. Proforma Invoice made and sent to you as the price agreed by both parts; 
3. Deposit Payment after confirming the PI and we arrange production; 
4. Balance paid before shipment or after copy of Bill of Loading.

The Functions of Splined Shaft Bearings

Splined shafts are the most common types of bearings for machine tools. They are made of a wide variety of materials, including metals and non-metals such as Delrin and nylon. They are often fabricated to reduce deflection. The tooth profile will become deformed with time, as the shaft is used over a long period of time. Splined shafts are available in a huge range of materials and lengths.

Functions

Splined shafts are used in a variety of applications and industries. They are an effective anti-rotational device, as well as a reliable means of transmitting torque. Other types of shafts are available, including key shafts, but splines are the most convenient for transmitting torque. The following article discusses the functions of splines and why they are a superior choice. Listed below are a few examples of applications and industries in which splines are used.
Splined shafts can be of several styles, depending on the application and mechanical system in question. The differences between splined shaft styles include the design of teeth, overall strength, transfer of rotational concentricity, sliding ability, and misalignment tolerance. Listed below are a few examples of splines, as well as some of their benefits. The difference between these styles is not mutually exclusive; instead, each style has a distinct set of pros and cons.
A splined shaft is a cylindrical shaft with teeth or ridges that correspond to a specific angular position. This allows a shaft to transfer torque while maintaining angular correspondence between tracks. A splined shaft is defined as a cylindrical member with several grooves cut into its circumference. These grooves are equally spaced around the shaft and form a series of projecting keys. These features give the shaft a rounded appearance and allow it to fit perfectly into a grooved cylindrical member.
While the most common applications of splines are for shortening or extending shafts, they can also be used to secure mechanical assemblies. An “involute spline” spline has a groove that is wider than its counterparts. The result is that a splined shaft will resist separation during operation. They are an ideal choice for applications where deflection is an issue.
A spline shaft’s radial torsion load distribution is equally distributed, unless a bevel gear is used. The radial torsion load is evenly distributed and will not exert significant load concentration. If the spline couplings are not aligned correctly, the spline connection can fail quickly, causing significant fretting fatigue and wear. A couple of papers discuss this issue in more detail.
splineshaft

Types

There are many different types of splined shafts. Each type features an evenly spaced helix of grooves on its outer surface. These grooves are either parallel or involute. Their shape allows them to be paired with gears and interchange rotary and linear motion. Splines are often cold-rolled or cut. The latter has increased strength compared to cut spines. These types of shafts are commonly used in applications requiring high strength, accuracy, and smoothness.
Another difference between internal and external splined shafts lies in the manufacturing process. The former is made of wood, while the latter is made of steel or a metal alloy. The process of manufacturing splined shafts involves cutting furrows into the surface of the material. Both processes are expensive and require expert skill. The main advantage of splined shafts is their adaptability to a wide range of applications.
In general, splined shafts are used in machinery where the rotation is transferred to an internal splined member. This member can be a gear or some other rotary device. These types of shafts are often packaged together as a hub assembly. Cleaning and lubricating are essential to the life of these components. If you’re using them on a daily basis, you’ll want to make sure to regularly inspect them.
Crowned splines are usually involute. The teeth of these splines form a spiral pattern. They are used for smaller diameter shafts because they add strength. Involute splines are also used on instrument drives and valve shafts. Serration standards are found in the SAE. Both kinds of splines can also contain a ball bearing for high torque. The difference between the 2 types of splines is the number of teeth on the shaft.
Internal splines have many advantages over external ones. For example, an internal spline shaft can be made using a grinding wheel instead of a CNC machine. It also uses a more accurate and economical process. Furthermore, it allows for a shorter manufacturing cycle, which is essential when splining high-speed machines. In addition, it stabilizes the relative phase between the spline and thread.
splineshaft

Manufacturing methods

There are several methods used to fabricate a splined shaft. Key and splined shafts are constructed from 2 separate parts that are shaped in a synchronized manner to transfer torque uniformly. Hot rolling is 1 method, while cold rolling utilizes low temperatures to form metal. Both methods enhance mechanical properties, surface finishes, and precision. The advantage of cold rolling is its cost-effectiveness.
Cold forming is 1 method, as well as machining and assembling. Cold forming is a unique process that allows the spline to be shaped to the desired shape. The resulting shape provides maximum contact area and torsional strength. Standard splines are available in standard sizes, but custom lengths can also be ordered. CZPT offers various auxiliary equipment, such as mating sleeves and flanged bushings.
Cold forging is another method. This method produces long splined shafts that are used in automobile propellers. After the spline portion is cut out, it is worked on in a hobbing machine. Work hardening enhances the root strength of the splined portion. It can be used for bearings, gears, and other mechanical components. Listed below are the manufacturing methods for splined shafts.
Parallel splines are the simplest of the splined shaft manufacturing methods. Parallel splines are usually welded to shafts, while involute splines are made of metal or non-metals. Splines are available in a wide variety of lengths and materials. The process is usually accompanied by a process called milling. The workpiece rotates to produce the serrated surface.
Splines are internal or external grooves in a splined shaft. They work in combination with keyways to transfer torque. Male and female splines are used in gears. Female and male splines correspond to 1 another to ensure proper angular correspondence. Involute splines have more surface area and thus are stronger than external splines. Moreover, they help the shaft fit into a grooved cylindrical member without misalignment.
A variety of other methods of manufacturing a splined shaft can be used to produce a splined shaft. Spline shafts can be produced using broaching and shaping, 2 precision machining methods. Broaching uses a metal tool with successively larger teeth to remove metal and create ridges and holes in the surface of a material. However, this process is expensive and requires special expertise.
splineshaft

Applications

The splined shaft is a mechanical component with a helix-like shape formed by the equal spacing of grooves in a circular ring. The splines can either have parallel or involute sides. The splines minimize stress concentration in stationary joints and can be used in both rotary and linear motion. In some cases, splines are rolled rather than cut. The latter is more durable than cut splines and is often used in applications requiring high strength, accuracy, and smooth finish.
Splined shafts are commonly made of carbon steel. This alloy steel has a low carbon content, making it easy to work with. Carbon steel is a great choice for splines because it is malleable. Generally, high-quality carbon steel provides a consistent motion. Steel alloys are also available that contain nickel, chromium, copper, and other metals. If you’re unsure of the right material for your application, you can consult a spline chart.
Splines are a versatile mechanical component. They are easy to cut and fit. Splines can be internal or external, with teeth positioned at equal intervals on both sides of the shaft. This allows the shaft to engage with the hub around the entire circumference of the hub. It also increases load capacity by creating a constant multiple-tooth point of contact with the hub. For this reason, they’re used extensively in rotary and linear motion.
Splined shafts are used in a wide variety of industries. CZPT Inc. offers custom and standard splined shafts for a variety of applications. When choosing a splined shaft for a specific application, consider the surrounding mated components, torque requirements, and size requirements. These 3 factors will make it the ideal choice for your rotary equipment. And you’ll be pleased with the end result!
There are many types of splines and their applications are endless. They transfer torque and angular misalignment between parts, and they also enable the axial rotation of assembled components. Therefore, splines are an essential component of machinery and are used in a wide range of applications. This type of shaft can be found in various types of machines, from household appliances to industrial machinery. So, the next time you’re looking for a splined shaft, make sure you look for a splined one.

China best Factory Supply RW826 Fw107 311309 191498625 6n0498625 407260016 Fwb17 513021 311309 Wheel Beaeing for Audi VW with High Quality   near me shop China best Factory Supply RW826 Fw107 311309 191498625 6n0498625 407260016 Fwb17 513021 311309 Wheel Beaeing for Audi VW with High Quality   near me shop

Tags:

Recent Posts