China Yutong Air Suspension Axle Factory Customized Rear Axle Electric ATV Rear Drive Axle for Bus Coach with Best Sales

Solution Description

Model

AR130L

 

 

Rated load(kg)

13000

Brake Type

Disc

Air Bag Distance (mm)

728

Tire

275/70R22.5 (Dual.)

Ratio

6.seventeen/5.fifty seven

Flange Kind

Experience Tooth

Wheel Hub Sort

Bearing Device

Method Bodyweight (kg)

Airbag

Applicaition

11~18 m New Energy Bus / Coach

Excess weight(oil included)(kg)

630

Type: Rear Axle Assembly–Intermediate Structure                                          Type: Entrance Axle Assembly-Minimal Floor

Application: 10~14m City Bus                                                                            Software: ten~14m Mentor/Metropolis Bus

Type: Entrance Axle Assembly-Independent                                                            Kind: Rear Axle Assembly–IntermediateStructure

Software: 8~10m Mentor/City Bus                                                                   Application: 8~10m Coach/Town Bus

Variety: Front Axle Assembly–Impartial Suspension                           Kind: Rear Axle Assembly--Air Suspension

Software: 5~8m Mentor/City Bus                                                                Software: 5~8m Coach/Town Bus

Sort: Rear Axle Assembly–Biased Structure                                                     Variety: Entrance Axle Assembly–Impartial Suspension

Application: 10~14m Town Bus/Lower floor                                                             Application: ten~14m Town Bus/Lower ground

Financial system of The Axle and Suspension

In buy to enhance the axle and suspension quality, enhance customer vehicle knowledge, reduce right after-product sales routine maintenance expenses, totally find out from domestic and international innovative axle engineering, especially in the axle wheel edge exclusive innovation, from grease lubricated wheel edge, to oil lubricated wheel edge, and then to the maintainance free axle ans suspension wheel edge, when compared with the earlier generation, there is a qualitative leap. Amid them, there are 2 sorts of routine maintenance-free of charge wheel edge: oil lubrication maintenance-free (typically 500,000 km servicing-cost-free) and built-in upkeep-cost-free (specifically bearing device, 5 several years / 800,000 km servicing-cost-free).

 DUOYUAN Vehicle Gear CO.LTD

Duoyuan vehicle products, addresses an location of far more than 100 acres and has over three hundred employees, such as much more than ninety professionals and specialized staff, far more than ten senior engineers, and much more than 30 intermediate engineers.

Our purpose is to become the third social gathering expert auto components supplier with innovative spirit and top engineering. With steady construction and advancement for sixteen years, we have cooperate with YuTong Group for a time period approach. Existing product market place volume: Above 400,000 pieces of bus specific axles, more than 250,000 kits of bus air suspensions yearly production ability: a hundred,000 pieces of bus unique axle and fifty,000 kits of bus air suspensions. In 2018, our revenue exceeded RMB 1.5 billion.

At current, our items are mainly bus-oriented, providing matching goods to entire ranges of designs this kind of as passenger bus, tourist bus, group bus, community transportation bus, school buses and new strength bus Also, we are actively expanding truck and other business motor vehicle markets. Our goods are sold to a lot more than one hundred thirty nations and areas in the planet these kinds of as Cuba, Venezuela, Russia, Iran and Saudi Arabia as areas of comprehensive automobile.

In order to comprehend a better future, we, by upholding the spirit of exploration, understand widely from others’ strong factors and absorb foreign and domestic innovative expertise, and attempt for the advancement of China’s automotive equipment.

FAQ

Q:Are you investing organization or maker?

A: We are manufacturing facility who have been specializing in designing and producing axle and suspension for twenty years .
Q:Can your products be tailored or modified?

A: We can style and produce the axl and suspension in accordance to customers’ demands and motor vehicle parameters .
Q: What is your phrases of payment ?
A: one hundred% Advance payment by T/T following signing the agreement.
Q: What is your conditions of packing?
A: Typically, we place buggy axle on Wood pallets,Extend movie set in wood box . Or Customer essential.
Q: How extended is your shipping and delivery time?
A: Generally it is fifteen-25 times if the products are in inventory. or it is 35-forty five times if the goods are not in inventory, it is according to
quantity.
Q: What is your axl sample coverage?
A: We can provide the buggy axle sample if we have prepared elements in stock, but the customers have to shell out the sample expense and he courier expense.You should speak to with me with buggy axle.
Q. Do you check all your buggy axle prior to shipping?
A: Indeed, we have 100% take a look at prior to supply
Q: How do you make our organization prolonged-expression and good romantic relationship?
A:1. We hold axle and suspension a excellent quality and aggressive price to guarantee our consumers benefit
two. We respect each client as our buddy and we sincerely do enterprise and make buddies with them, no subject where they arrive from.

 

After-sales Service: 1 Year
Condition: New
Axle Number: 2
Application: Car
Certification: ISO, ISO/Ts16949
Material: Steel

###

Customization:

###

Model
AR130L
 
 
Rated load(kg)
13000
Brake Type
Disc
Air Bag Distance (mm)
728
Tire
275/70R22.5 (Dual.)
Ratio
6.17/5.57
Flange Type
Face Tooth
Wheel Hub Type
Bearing Unit
System Weight (kg)
Airbag
Applicaition
11~18 m New Energy Bus / Coach
Weight(oil included)(kg)
630
After-sales Service: 1 Year
Condition: New
Axle Number: 2
Application: Car
Certification: ISO, ISO/Ts16949
Material: Steel

###

Customization:

###

Model
AR130L
 
 
Rated load(kg)
13000
Brake Type
Disc
Air Bag Distance (mm)
728
Tire
275/70R22.5 (Dual.)
Ratio
6.17/5.57
Flange Type
Face Tooth
Wheel Hub Type
Bearing Unit
System Weight (kg)
Airbag
Applicaition
11~18 m New Energy Bus / Coach
Weight(oil included)(kg)
630

Different Types of Axles

An axle is the central shaft of a gear or wheel. It can be mounted to a wheel or to the vehicle itself, and will rotate with the wheels and vehicle. It may also contain bearings. Some vehicles have different types of axles, including Live, Split, Tandem, and Drop-out axles.

Live axle

A beam axle, also called a rigid axle, is a type of dependent suspension system. It connects a set of wheels lateral to one another. In previous times, beam axles were used in the rear of a vehicle, and later on, as the front axle in four-wheel-drive vehicles.
Live axles are also popular on trucks. They can provide better traction and keep the vehicle at a constant height. This is especially helpful for off-road vehicles. Those vehicles are typically driven slowly and the suspension is not as important as handling and cornering. Nonetheless, some trucks still use this design. It can be a great option if you are looking for a vehicle that handles well.
Live axles have a number of drawbacks. The front end of a live axle can destabilize and affect cornering grip. They also require a means of locating the axle, which may be an issue with heavy or lightweight vehicles. Leaf springs can help in this regard. Alternatively, you can opt for an independent rear axle.
Live axles are a great option for drag racing vehicles. They offer better traction and a better structural base than a conventional full floater axle assembly. They also allow for increased gear life and reduce rear end distortion.
Axles

Split-axle

If you aren’t sure how to make split axles, you’re not alone. The process can be very difficult, and the parts can get mixed up. The key is to know how to create the proper alignment for your axles. Thankfully, there are some tools that can make this job a breeze.
Split axles have two components: a bolt head 30 that acts as a stop during relative pivotal movement. The axle assembly 16 is then pivotally mounted between the brackets and the frame. During pivotal movement, the bolt head 30 acts as a stop and prevents the axle from moving too far either way. This is done to maintain the pad 28 at a predetermined compression level. This allows the axle to perform a smooth and consistent drive.
Split axles are a common feature of modern vehicles. This type of suspension system provides greater traction, and it allows the left and right wheels to roll at different speeds. It also prolongs the life of tires, and increases traction.

Tandem

A tandem axle trailer is a great choice for hauling large loads. This style of trailer comes with more features and is more stable. These trailers are usually available in 16′, 18′, or 20′ lengths. They are also available with 8,500, or 10,000 GVW capacities. They are a great choice for hauling large loads on main highways.
Tandem axles are commonly used on trucks. Each axle features a drive mechanism, and are attached to the engine power unit. There are two types of tandem axles, one with a standard differential and the other with a power divider. Drivers may have trouble figuring out which axle is driving the truck at different times, so it is important to understand how each type of axle works.
While there are some common rules that apply to tandem axles, there are also some exceptions. In some cases, a single axle has a lower weight limit than a tandem axle, and the two axles must be at least 40 inches apart.

Drop-out

Drop-out axles are used to connect the dropouts of a bike frame. When using dropouts, make sure the distance between the axles is 110mm. Then use a clamp to squeeze the dropouts together. Make sure to measure both dropouts carefully, because a 1mm difference in the width can cause a lot of trouble.
The 9″ drop-out axle was produced from the late 1950s to 1986. They were made in trucks and cars, but not in motorcycles. To use this axle in a 1990 LTD CV, you will need to make several modifications to the mounting of the axle and connection to the drive line. You will also need to consider installing a parking brake. Moreover, this axle is not compatible with the Panther platform. In fact, the drop-out axle is available in several variations.
Drop-out axles are also known as single-speed. The lower part is called the semi-horizontal dropout, while the upper part is called the vertical dropout. This dropout includes an eyelet for mounting a fender or rack.
Axles

Czpt

The Czpt axle is a popular choice for a wide variety of vehicles. Initially used in heavy-duty pickup trucks, it was eventually adopted by all major automakers in the U.S., including Ford, Dodge, and Chrysler. It also became popular as a front differential on 4WD vehicles.
Czpt axles are easy to recognize, and the numbering system is consistent regardless of the vehicle model. The axle’s model number is found on the right lower web of the housing near the pinion yoke. It is also stamped on the axle tube. If you can’t find the axle model number, you can find it on Czpt’s website.
Czpt axles are also recognizable by their Bill of Materials (BOM) number. This is like a vehicle’s VIN number, and it identifies the axle’s gear ratio, model number, and component parts. A Czpt axle’s BOM number starts with 60 or 61.
The Czpt axle is the most common axle size in Jeeps. The Czpt 30 axle is the standard, and can be found on most Jeeps. The YJ version of this axle uses a reverse cut ring and pinion, while the TJ version does not. It is made from 5×4.5 inch bolts.

Universal joint

A universal joint is a component that connects two wheels to one another. This component is made to replace worn out or damaged parts on axles. They are also used to repair and replace brakes and drive shaft yokes. The universal joint can be purchased at an auto parts store or online. To replace a universal joint, you need to remove the axle shaft and the front brakes.
The universal joint is a flexible pivot point that transfers power between two shafts. In order to work properly, it must be flexible enough to compensate for changes in the driveline angle. These changes may be due to changing terrain. The universal joint is an important part of the driveline. It is used in both manual and automatic transmissions.
A universal joint should be serviced regularly to maintain its performance. If your universal joint squeaks while driving, it is a sign that it needs to be serviced. A lubricant can help extend the life of a u-joint.
Axles

Spindle

Your vehicle’s axle consists of two main components: the hub and the spindle. The spindle rides on the hub, which can become damaged or lose its shape when it hits something. The spindle is also prone to wear from high mileage, and its threads can be damaged. If you suspect that your spindle needs to be replaced, there are several options available.
Axle spindles can be installed in one of three ways. The typical assembly includes bolted spindles on the ends of a tubular axle. The axle is then suspended by springs. Another type of mounting involves a torsion beam on the axle leg, which acts as a spring. It flexes and bends to provide the turning motion. The axle spindle can be a replacement part for your trailer, and there are towing supplies and professionals who can do it for you.
China Yutong Air Suspension Axle Factory Customized Rear Axle Electric ATV Rear Drive Axle for Bus Coach     with Best Sales China Yutong Air Suspension Axle Factory Customized Rear Axle Electric ATV Rear Drive Axle for Bus Coach     with Best Sales
editor by czh 2022-12-19

Tags:

Recent Posts