Product Description
Products Description
Car fitment:
- AUDI
- SEAT
- ALTEA (5P1) [2004-]
- ALTEA XL (5P5, 5P8) [2006-]
- LEON (1P1) [2005-2013]
- TOLEDO III (5P2) [2004-2009]
- SKODA
- OCTAVIA I Combi (1U5) [1998-2571]
- OCTAVIA II (1Z3) [2004-2013]
- OCTAVIA II Combi (1Z5) [2004-2013]
- VOLKSWAGEN
- CADDY III Box (2KA, 2KH, 2CA, 2CH) [2004-2015]
- CADDY III Estate (2KB, 2KJ, 2CB, 2CJ) [2004-2015]
- EOS (1F7, 1F8) [2006-2015]
- GOLF PLUS (5M1, 521) [2004-2013]
- GOLF V (1K1) [2003-2009]
- GOLF V Variant (1K5) [2007-2009]
- JETTA III (1K2) [2004-2571]
- PASSAT (3C2) [2005-2571]
- PASSAT Variant (3C5) [2005-2011]
- TIGUAN (5N_) [2007-]
- TOURAN (1T1, 1T2) [2003-2571]
- Eos 2007-2009
- Golf 2006 L4, 1.8L, GTI 1.8T
- GTI 2009
- Jetta 2005-2009
- Jetta 2008 GLI
- Jetta 2008 S
- Jetta 2008 SE
- Jetta 2008 SEL
- Passat 2006-2008
- Passat 2006-2008 4 Motion
- Rabbit 2007
- Rabbit 2009
- Rabbit 2006 L5, 2.5L
- Rabbit 2008- S
- VW (FAW)
- CADDY Box [2004-2007]
- SAGITAR [2006-2012]
- VW (SVW)
- TOURAN (1T1, 1T2) [2004-]
Specification:
Front Axle,Rear Axle
Flange Diameter: 5.4 In.
Bolt Circle Diameter: 4.4 In.
Wheel Pilot Diameter: 2.2 In.
Brake Pilot Diameter: 2.6 In.
Flange Offset: 1.5 In.
Hub Pilot Diameter: 3.3 In.
Hub Bolt Circle Diameter: 4.2 In.
Bolt Quantity: 5
Bolt Hole qty: 4
ABS Sensor: Yes
Number of Splines: 36
Wheel Hub Bearing
A hub bearing, also known as a wheel hub bearing, enables the wheels and attached components to rotate smoothlyand keeps the wheel attached to the car. The bearings are mounted on a wheel hub, which is located between the brake drums and the axle.
Wheel bearings wear out over time due to age and contamination. As they wear out, excess play also develops in the bearing. The main signs of a damaged wheel hub bearing are abnormal noises and loose steering.
Our hub bearing assemblies are made from high quality materials for durability, reliability, and high performance.
A high quality seal design offers premium protection from contamination and ensures a clean, long lasting hub bearing.
Our hub bearings are precision-machined and pre-coated with an anti-corrosion lubricant for enhanced protection and performance. They are manufactured to meet or exceed expectations for performance and fit.
In addition, they are designed for quick and easy installation. Please note: Hub Bearings should always be replaced in pairs (front or rear).
In addition, hub bearings must be torqued to vehicle specifications to prevent failure.
Solver problem:
- Frequently unberable
- Car Jitter
- Power reduction
- Car noise
Features:
- Good Ball: Precision and dimensions are more stable.
-
Good grease: allow the bearing to roll smoother.
-
Durable quality: excellent metal material, wear-resistant and durable.
All products are all factory full inspection , like ABS detection,noise detection, cleareance detection for completed product, vibration detection, Angular clearance detection, Waterproof and dustproof detection and so on, making products more durable,more safe and life longer.
- Reduce abnormal noise,Stable driving
- High security
- Longer service life and lower maintenance cost.
- In-situ installation: Original specification,installation in 1 step. With accurately locate mounting holes.
Why choose us to be your cooperated supplier from China?
1. A wide range of Wheel Hub Bearingfor options.
2. Quality assurance: Advanced equipment, 100% finished product check, all of the products are inpsected carefully by QC before delivery. Product is Safe, Fixed,Stable,Durable.
3. Fast delivery, Prompt response,Professional staffs.
4. The customized components also can be manufactured
5. Neutral packing, export standard carton, or as your requirement.
6. Competive price: Order a HQ container, price will be more favorable.
Related Products
1. A wide range of Radiator Cooling Fan and other parts for options.
2. Quality assurance: Advanced equipment, 100% finished product check, all of the products are inpsected carefully by QC before delivery. Product is Safe, Fixed,Stable,Durable.
3. Fast delivery, Prompt response,Professional staffs.
4. The customized components also can be manufactured
5. Neutral packing, export standard carton, or as your requirement.
6. Competive price: Order a HQ container, price will be more favorable.
VW, AUDI, BENZ, BMW, PORSHCHE, LAND ROVER,Toyota, Nissan, Mitsubishi, Honda, Mazda , Hyundai Fordetc.
1. Clutch system
2. Cooling system
3. Electrical system
4. Transmission system
5. Steering system
6. Drive system
7. Suspension system
8.Braking syste
Company Introduction
FAQ
1. Is the product fit to your car model?
Please check if the parts are suitable for your model before purchase.
Or please tell us your Car Model and OE Number, and tell us the product name.
2. What you can supply to me?
We could supply all kinds of auto spare parts and accessories. Besides ,we provide OEM service, shipping service and QC service as well to make sure you get ONE-STOP purchase process from us.
3. Can you customize the products as per our request?
Yes, we do OEM and ODM. We could make the product suggestion based on your idea and budget.
4. How to get a sample from you?
All samples will be free if unit cost under 20USD,but the freight should be on your side. If you have express account like DHL,UPS etc we will send you directly, if you don’t have you can send express cost to our paypal account, any sample cost could be returned when you make order.
5. What’s your payment term?
We usually doing 30% deposit and 70% balance against copy of B/L by T/T, We also accept L/C ,D/P if total amount over $30000.
Welcome to your inqury now and built a long cooperatitive relationship with our professional service.
Windy Zhang
Drive shaft type
The driveshaft transfers torque from the engine to the wheels and is responsible for the smooth running of the vehicle. Its design had to compensate for differences in length and angle. It must also ensure perfect synchronization between its joints. The drive shaft should be made of high-grade materials to achieve the best balance of stiffness and elasticity. There are 3 main types of drive shafts. These include: end yokes, tube yokes and tapered shafts.
tube yoke
Tube yokes are shaft assemblies that use metallic materials as the main structural component. The yoke includes a uniform, substantially uniform wall thickness, a first end and an axially extending second end. The first diameter of the drive shaft is greater than the second diameter, and the yoke further includes a pair of opposing lugs extending from the second end. These lugs have holes at the ends for attaching the axle to the vehicle.
By retrofitting the driveshaft tube end into a tube fork with seat. This valve seat transmits torque to the driveshaft tube. The fillet weld 28 enhances the torque transfer capability of the tube yoke. The yoke is usually made of aluminum alloy or metal material. It is also used to connect the drive shaft to the yoke. Various designs are possible.
The QU40866 tube yoke is used with an external snap ring type universal joint. It has a cup diameter of 1-3/16″ and an overall width of 4½”. U-bolt kits are another option. It has threaded legs and locks to help secure the yoke to the drive shaft. Some performance cars and off-road vehicles use U-bolts. Yokes must be machined to accept U-bolts, and U-bolt kits are often the preferred accessory.
The end yoke is the mechanical part that connects the drive shaft to the stub shaft. These yokes are usually designed for specific drivetrain components and can be customized to your needs. Pat’s drivetrain offers OEM replacement and custom flanged yokes.
If your tractor uses PTO components, the cross and bearing kit is the perfect tool to make the connection. Additionally, cross and bearing kits help you match the correct yoke to the shaft. When choosing a yoke, be sure to measure the outside diameter of the U-joint cap and the inside diameter of the yoke ears. After taking the measurements, consult the cross and bearing identification drawings to make sure they match.
While tube yokes are usually easy to replace, the best results come from a qualified machine shop. Dedicated driveshaft specialists can assemble and balance finished driveshafts. If you are unsure of a particular aspect, please refer to the TM3000 Driveshaft and Cardan Joint Service Manual for more information. You can also consult an excerpt from the TSB3510 manual for information on angle, vibration and runout.
The sliding fork is another important part of the drive shaft. It can bend over rough terrain, allowing the U-joint to keep spinning in tougher conditions. If the slip yoke fails, you will not be able to drive and will clang. You need to replace it as soon as possible to avoid any dangerous driving conditions. So if you notice any dings, be sure to check the yoke.
If you detect any vibrations, the drivetrain may need adjustment. It’s a simple process. First, rotate the driveshaft until you find the correct alignment between the tube yoke and the sliding yoke of the rear differential. If there is no noticeable vibration, you can wait for a while to resolve the problem. Keep in mind that it may be convenient to postpone repairs temporarily, but it may cause bigger problems later.
end yoke
If your driveshaft requires a new end yoke, CZPT has several drivetrain options. Our automotive end yoke inventory includes keyed and non-keyed options. If you need tapered or straight holes, we can also make them for you.
A U-bolt is an industrial fastener that has U-shaped threads on its legs. They are often used to join 2 heads back to back. These are convenient options to help keep drivetrain components in place when driving over rough terrain, and are generally compatible with a variety of models. U-bolts require a specially machined yoke to accept them, so be sure to order the correct size.
The sliding fork helps transfer power from the transfer case to the driveshaft. They slide in and out of the transfer case, allowing the u-joint to rotate. Sliding yokes or “slips” can be purchased separately. Whether you need a new 1 or just a few components to upgrade your driveshaft, 4 CZPT Parts will have the parts you need to repair your vehicle.
The end yoke is a necessary part of the drive shaft. It connects the drive train and the mating flange. They are also used in auxiliary power equipment. CZPT’s drivetrains are stocked with a variety of flanged yokes for OEM applications and custom builds. You can also find flanged yokes for constant velocity joints in our extensive inventory. If you don’t want to modify your existing drivetrain, we can even make a custom yoke for you.
